| Euro MK1 Motors & Parts
|
| Available Double Security Sealed
|
|
PS-4000 |
Euro MK1 Motor - 26,100 + rpm, 155/gm-cm, 280mA, standard with 45 degree springs. Designed for 1/32 and 1/24 Scale-
Home, Club and Commercial Racing. CW or CCW rotation
|
$13.95
|
| PS-4001 |
Euro MK1 Motor - 37,000 + rpm, 160/gm-cm, 300mA, standard with 60 degree springs. Designed for 1/32 and 1/24 Scale -
Home, Club and Commercial Racing. CW or CCW rotation
|
$13.95
|
| PS-4002
|
Euro MK 1 Motor - 47,000 + rpm, 160/gm-cm, 950mA, standard with 90 degree springs. Designed for 1/32 and 1/24 Scale -
Home, Club and Commercial Racing.
|
$13.95
|
| PS-4002B |
Euro MK1 Motor with American made PD (Puppy Dog) armature as used in retro can am racing- This motor runs
correctly CW Rotation.
|
$42.00
|
| PS-4002B-B |
Euro MK1 Motor with American made PD (Puppy Dog) armature and can ball bearing, as used in retro can am racing-This motor runs correctly CW Rotatio
|
$48.00
|
| PS-4002B-CCW
|
Euro MK1 Motor with American made PD (Puppy Dog) armature as used in retro can am racing- This motor runs
correctly CCW Rotation.
|
$42.00
|
| PS-4002B-BCCW |
Euro MK1 Motor with American made PD (Puppy Dog) armature and can ball bearing, as used in retro can am racing- This motor runs correctly CCW Rotation. |
$48.00
|
| PS-4002C
|
Euro MK1 Motor with American made BD (Big Dog) armature CW Rotation.
|
$42.00
|
| PS-4002C-CCW
|
Euro MK1 Motor with American made BD (Big Dog) armature CCW Rotation.
|
$42.00
|
| PS-4002-12
|
Euro MK 1 Motor with American made X12 armature 38* CW Rotation
|
$42.00
|
| PS-4002-12-CCW
|
Euro MK 1 Motor with American made X12 armature 38* CCW Rotation
|
$42.00
|
| PS-4002-R
|
Raptor Euro MK-1 Motor with American Made Hawk Armature CW Rotation
|
$42.00
|
| PS-4002-R-CCW
|
Raptor Euro MK-1 Motor with American Made Hawk Armature CCW Rotation
|
$42.00
|
| PS-4008 |
Replacement balanced armature for the PS-4002 (commutator trued and rebalanced)
|
$9.29
|
| PS-4009 |
PD (Puppy Dog) American made replacement armature (requires modified endbell PS-4011 for comm clearance). CW Rotation
|
$25.50
|
| PS-4010
|
BD (Big Dog) 55 turns of 30 gauge with 25 degrees timing American made replacement armature (requires modified endbell
PS-4011 for comm clearance). CW Rotation
|
$25.50
|
| PS-4010-CCW
|
BD (Big Dog) 55 turns of 30 gauge with 25 degrees timing American made replacement armature (requires modified
endbell PS-4011 for comm clearance). CCW Rotation
|
$25.50
|
| PS-4011 |
Replacement endbell modified for commutator clearance with American made armatures
|
$6.50
|
| PS-4012
|
X12 with 38 degrees timing American made replacment armature (requires modifed endbell PS-4011 for comm clearance). CW
Rotation
|
$25.50
|
| PS-4012-CCW
|
X12 with 38 degrees timing American made replacment armature (requires modifed endbell PS-4011 for comm
clearance). CCW Rotation
|
$25.50
|
| PS-4013-45 |
Replacement Springs 45 degrees
|
(6 pair/cd $1.00 ea.) $6.00
|
| PS-4013-60 |
Replacement Springs 60 degrees
|
(6 pair/cd $1.00 ea.) $6.00
|
| PS-4013-90 |
Replacement Springs 90 degrees
|
(6 pair/cd $1.00 ea.) $6.00
|
| PS-4014
|
Replacement Motor Brushes
|
(6 pair/cd $1.60 ea.) $9.60
|
| PS-4016
|
Hawk Replacement Armatures
|
$26.50
|
| Note: Clockwise or counter clockwise Rotation when armature is viewed from the can end. Motors and
armatures with CCW rotation are best suited for 1/32 cars of Slot-it, Mosler and Scaleextric and any other
that requires armatures and motors with CCW Rotation.
|
|
|
| Velociraptor Euro MK1 Series of Dragmaster Motors and Components |
| PS-4017
|
Velociraptor “NEO” setup This setup has standard .540 airgap and comes with our PS-4011
modified endbell. It accepts any of our Euro armatures. This is the most powerful Euro MK1 setup currently
made, gaussing 1800 points and producing incredible torque. Add $14.00 for double ball bearing
|
$39.00
|
| PS-4018
|
Velociraptor “NEO” magnets They are made to the same dimensions as our OEM Euro MK1
ceramic magnet. This means that they install in our standard Euro MK1 can with the stock magnet retaining
clips and a drop of super glue. No epoxy or special tools neede
|
$16.95
|
| PS-4019 |
Velociraptor VF 12 “NEO” motor This motor uses the new PS-4017 “Neo” Euro MK1 setup with
our PS-4012 Euro X-12 armature and includes Goldust brushes. Built for the new wave of “NEO” F/C racing.
Our testing using an 85 gram hardbody test car netted .720 ET’s @ 70+ MPH. Recommended starting gear ratio
14/52. Add $14.00 for double ball bearings
|
$58.95
|
| PS-4020
|
Velociraptor VR 20 “NEO” motor This motor uses the new PS-4017 “NEO” Euro MK1 setup with a
specially made .500 diameter VR20 machine wound armature on our race proven Intruder blank and includes
Goldust brushes. This motor was built for the “Serious” bracket racer and would be great for a “NEO” G20 F/C
class. Our testing using an 85 gram hardbody test car netted .640 ET’s @ 80+ MPH. Recommended starting
gear ratio 14/54. Add $14.00 for double ball bearings
|
$63.95
|
| PS-4021
|
Velociraptor VR eXtreme “NEO motor This motor uses the new PS-4017 “NEO” Euro MK1 setup
with a specially made .500 diameter VR eXtreme machine wound armature on our race proven Intruder blank
and includes Goldust brushes. This motor was built for the “Ultimate” braket racer and “Outlaw NEO” class
racer. Our testing using an 85 gram hardbody test car netted .590 ET’s @ 90+ MPH. This motor has no equal in
performance for the money. Recommended starting gear ration 14/54. Add $14.00 for double ball bearings.
|
$68.95
|
| PS-4022
|
Velociraptor VR 20 “NEO” Replacement Armature Machine wound G20 armature, .500 diameter,
wound on our race proven Intruder blank. This armature is specially sized to fit the PS-4017 “NEO” Euro MK1
setup to provide the ideal airgap with no other modifications needed.
|
$39.95
|
| PS-4023
|
Velociraptor VR eXtreme “NEO” Replacement Armature Machine wound, eXtreme wind
armature, .500 diameter, wound on our race proven Intruder blank. This armature is specially sized to fit the PS-
4017 “NEO” Euro MK1 setup to provide the ideal airgap with no other modifications needed. This the fastest
machine wound armature available for the PS-4017 “NEO” MK1 setup.
|
$39.95
|
| PS-4024
|
Velociraptor VR Custom “NEO” Armature This is a custom hand wound all-out Topgun style
armature featuring our EDM commutator, wound on our race proven Intruder blank. This armature is .500
standard diameter and is also available in .480 and .490 diameters for the custom motor builders as a special
order. Standard wind is 25/25. Also available in 18/24.5, 15/24, 14/24, 14/23
|
$58.50
|
| PS-4025
|
Velociraptor VR Open “NEO” motor This motor uses the new PS-4017 “NEO” Euro MK1 setup
with a specially made .500 diameter custom hand wound all-out Topgun style armature featuring our EDM
commutator, wound on our race proven Intruder blank. Standard wind 18/24.5 and double ball bearings. Also
available in 25/25, 15/24, 14/24 14/23
|
$116.50
|
|
|
| SpeedFX C-Can and D-Can Stamped Steel Chassis
|
| PS-5000
|
SpeedFX C-Can Chassis
|
$21.95
|
| PS-5000C
|
C-Can Center Section
|
$11.95
|
| PS-5001
|
SpeedFX D-Can Chassis
|
$21.95
|
| PS-5001C
|
D-Can Center Section
|
$11.95
|
| PS-5002
|
Standard pans
|
$10.95
|
| PS-5003
|
Medium pans
|
$10.95
|
| PS-5004
|
Light pans
|
$10.95
|
| PS-5010
|
Chassis Cotter Clips - 12
|
$3.00
|
|
|
| SpeedFX SRS C-CAN MOTORS
|
| PS-3000
|
X12 Balanced Motor- Black Endbell
|
$32.00
|
| PS-3000S
|
X12 Balanced Motor - Black Endbell - Double Security Sealed
|
$33.00
|
| PS-3001
|
Contender Balanced Motor - Natural Endbell
|
$32.00
|
| PS-3001S
|
Contender Balanced Motor - Natural Endbell - Double Security Sealed
|
$33.00
|
| PS-3006
|
X12 Replacement Balanced Armature (commutator trued)
|
$13.50
|
| PS-3007
|
Contender Replacement Balanced Armature (commutator trued)
|
$13.50
|
| Note: All replacement parts for these motors are available in our section "Motor and Endbell Parts"
|
|
|
| SpeedFX 16D/S16D Motors & Parts
|
| PS-2000
|
16D Balanced Motor
|
$14.99
|
| PS-2001
|
S16D Balanced Motor
|
$15.99
|
| PS-2002
|
16D Balanced Motor - Double Security Sealed
|
$15.49
|
| PS-2003
|
S16D Balanced Motor - Double Security Sealed
|
$16.49
|
| PS-2004
|
16D/S16D Motor Setup
|
$12.66
|
| PS-2005
|
16D/S16D Motor Can
|
$4.99
|
| PS-2006
|
16D Replacement Balanced Armature (commutator trued)
|
$11.45
|
| PS-2007
|
S16D Replacement Balanced Armature (commutator trued)
|
$11.45
|
| PS-2008
|
Replacement endbell
|
$2.50
|
| PS-2009
|
Replacement assembled endbell
|
$4.50
|
| PS-2010
|
Brush Hood and Heatsink Set
|
$4.50
|
| PS-2011
|
Alloy Spring Cups (1 pr.)
|
$1.50
|
| PS-2012
|
Endbell assembly screws (12 pcs.)
|
$2.10
|
| PS-2013
|
Motor Springs -double overhead (6 pr.)
|
$6.00
|
| PS-2014
|
Motor Brushes (6 pr.)
|
$6.60
|
| PS-2015
|
2 X 5 Can & Endbell Oilites (6 pcs.)
|
$3.60
|
| PS-2016
|
Matched Magnets (1 pr.)
|
$8.00
|
|
|
| SpeedFX 16D/S16D Blueprinted Motors & Setups
|
| PS-2100
|
Setup with Matched Magnets
|
$17.00
|
| PS-2100-B |
Setup with Matched Magnets and sized to fit .560 diameter armatures
|
$20.00
|
| PS-2101
|
Motor with S16D Balanced Armature
|
$28.99
|
| PS-2101S
|
Motor with S16D Balanced Armature - sealed and engraved
|
$29.99
|
| PS-2102
|
Motor with 16D Balanced Armature
|
$27.99
|
| PS-2102S
|
Motor with 16D Balanced Armature - sealed and engraved
|
$28.99
|
| PS-2103
|
Motor with PS-700 S16D Unbalanced Armature
|
$44.95
|
| PS-2104
|
Motor with PS-700 S16D Balanced Armature
|
$44.95
|
| PS-2105
|
Motor with PS-700S Outlaw S16D Balanced Armature
|
$44.95
|
| PS-2106
|
Motor with PS-706 16D Unbalanced Armature
|
$44.95
|
| PS-2107
|
Motor with PS-706 16D Balanced Armature
|
$44.95
|
| PS-2108
|
Blueprinted S16D Econo ProStock (EPS) Motor
|
$52.45
|
| PS-2108A
|
Blueprinted S16D Econo ProStock Motor with PS-105 Drag S16D armature
|
$57.50
|
| PS-2109
|
Econo ProStock (EPS) Armature
|
$23.95
|
| PS-2110
|
Motor with .560 Balanced Armature.Your choice of (A) S16D, (B) Outlaw S16D, (C) 16D
|
$49.30
|
| Note: Specify timing of 25, 38, 45 or 50 degrees for motors with PS armatures. The setup includes straightened can, soldered oilite, aligned and
honed brush hoods and matched magnets. The motors include the above plus goldust brushes, champion springs and are fully tested.
|
|
|
| DRAGMASTER SPEED PARTS
|
| PS-101
|
Sportsman "550" Big Block GP20 Drag Motor
|
$45.00
|
| PS-102
|
Sportsmand "550 Big Block GP20 Armatures
|
$30.50
|
| PS-103
|
.450 "Magnum" Topgun Motor (Your choice: Quad/6mag 43/44/54 wind)
|
$140.95
|
| PS-104
|
.450 "Magnum" Topgun Armature (Your choice: 43/44/54 wind)
|
$58.50
|
| PS-718
|
Dragmaster Competition series Purple Dot Setup with Oilites This is a professionally built setup by
Rodger Chiechi. It features our Dragmaster C-can sized and aligned with our new Purple Dot Quad Magnets. They
are matched, epoxied in place and honed to .520. This setup is completely blueprinted and ready for your choice
of armatures.
|
$61.95
|
| PS-719
|
Dragmaster Competition series Purple Dot Setup with Ball Bearings Same as PS-718 but with high
quality ball bearings
|
$81.95
|
| PS-725
|
Dragmaster "SPEC" Motor This motor was Dyno designed to fall between the PS-101 and PS-748-20
in performance but on a budget. This motor is based on our race proven "SRS" set-up and has an all new SPEC
armature featuring a softer launch than the Quad 20 but will still pull 110,000+ rpm at the topend! This motor comes
with Goldust brushes and is double security sealed to prevent tampering.
|
$57.30
|
| PS-737-D
|
The Dragmaster Sportsman Setup This setup includes our race proven Dragmaster can and endbell
w/copper hardware, Mega II FX magnets installed with spring clips. This setup is approved by the UDA for
competition.
|
$31.00
|
| PS-738-D-12
|
The Dragmaster Sportsman X-12 Motor This motor includes our race proven Dragmaster can and
endbell 2/copper hardware, Mega III FX magnets installed with spring clips and a PS-106 .513 X-12 40* armature*.
This motor is approved by the UDA for competition.
|
$58.70
|
| PS-738-D
|
The Dragmaster Sportsman G20 Motor This motor includes our race proven Dragmaster can and
endbell 2/copper hardware, Mega III FX magnets installed with spring clips and a PS-703 .513 G20 armature*. This
motor is approved by the UDA for competition.
|
$60.50
|
| PS-739-D
|
Dragmaster Sportsman SSA Spec Motor This motor includes our race proven Dragmaster can and
endbell, Mega III FX magnets installed with spring clips and a Specially tagged .513 G20 armature with 40 degrees
timing*. This armature is tagged "SSA20", dyed a special color and is only available in this motor, not separately.
The motor screws are ground and the can is sealed to prevent tampering. Goldust Brushes are installed. This motor
is approved by the UDA for competition.
|
$60.25
|
| PS-747
|
Dragmaster C-can This C-can was designed from the ground up strictly for Drag Racing.
|
$12.95
|
| PS-747-B Dragmaster C-can
|
Re-Sized for our thicker magnets
|
$15.95
|
| PS-748-12
|
Dragmaster Competition series Purple Dot Drag 12 Motor This is a professionally built complete
motor by Rodger Chiechi. It features our Dragmaster Competition series Purple Dot setup assembled with a PS-106
Hemi Drag 12 (custom timing available), modified Goldust brushes and shunts. This motor is completely
blueprinted and broken in ready for installation into your car. Standard with bushings and available with high
quality ball bearings. Add BB to the part number and $14.00 to the following price for ball bearings.
|
$104.95
|
| PS-748-20
|
Dragmaster Competition series Purple Dot Drag 20 Motor Same as PS-748-12 but with our PS-107
Hemi Drag 20 armature. Add BB to the part number and $14.00 to the following price for ball bearings.
|
$106.72
|
| PS-733
|
Dragmaster Competition series Purple Dot Top Gun Motor Same as PS-748-12 but with our PS-710
Topgun 84.5 armature. Add BB to the part number and $14.00 to the following price for ball bearings.
|
$123.45
|
| PS-909
|
Purple dot Dragmaster Quad Magnets This magnet has been in development for over one year and is
now ready. This is a special new type of ceramic material that has more gauss and higher coercive force. These
magnets are assembled with special orientation to give unbelievable mid-range torque and RPM. They are stronger
than .190/.200 thick magnets but are only .170 thick for easier motor assembly.
|
$29.95
|
|
|
| DRAGMASTER ARMATURES & ACCESSORIES
|
| PS-105
|
Drag Style S16D- .513 OD @ 45 degrees
|
$30.30 |
| PS-106
|
X-12 Hemi - 40 degrees timing .510
|
$39.95
|
| PS-107
|
Grp 20 Hemi - 35 degrees timing .510
|
$39.95
|
| PS-108
|
Drag H27- 46 degrees timing, available in .445 to .460 diameter. Specify when ordering.
|
$59.50
|
| PS-620
|
Dragster leadwire with clips 16" long
|
$2.50
|
| PS-710
|
Top Gun 18/24.5 - 18 degrees timing .510
|
$58.50
|
| PS-712
|
Pro Outlaw Grp 20 Hemi .510
|
$39.95
|
| PS-715
|
Pro X-12 Armature
|
$39.95
|
| PS-713
|
Top Gun Custom Winds. Specify when ordering.
|
$58.50
|
| PS-852
|
Group 7 Drag armature 21 degree timing, .445 diameter, .860 long and with our Edm commutator.
|
$66.98
|
| Available in 13/23, 14/23, 15/23, 14/24, 15/24 Specify wind when ordering.
|
|
|
| MegaMaster series of
|
| Drag Racing motors & components
|
| The new MegaMaster series motors feature our proven DragMaster C-can with the all-new
"Purple Dot - S" series of 6 segment C-can magnets. The armatures are wound on our state of
the art CNC winder featuring our single strand, series wound, layering technology to create the
ultimate in lower resistance & performance. Step up to the MegaMaster and re-write your
raceway record books!
|
| PS-718MM
|
MegaMaster 6-mag Busing Setup
|
$63.95
|
| PS-719MM
|
MegaMaster 6-mag ball bearing Setup
|
$83.95
|
| PS-733MM
|
MegaMaster Topgun Motor
|
$126.45
|
| PS-733BBMM
|
MegaMaster Topgun ball bearing Motor
|
$140.45
|
| PS-748-12MM
|
MegaMaster GP12 Motor
|
$118.95
|
| PS-748-20MM
|
MegaMaster GP20 Motor
|
$121.95
|
| PS-74820BBMM
|
MegaMaster GP20 ball bearing Motor
|
$135.95
|
| PS-748-12S
|
DragMaster GP12 with 6-Mags
|
$110.00
|
| PS-748-20S
|
DragMaster G20 with 6-Mags
|
$113.00
|
| PS-748-20S-BB
|
DragMaster G20 with 6-Mags and ball bearings
|
$127.25
|
| PS-909S
|
MegaMaster 6-Mags (Magnets Only)
|
$29.95
|
|
|
| MegaMaster Armatures
|
| PS-106MM
|
MegaMaster GP12 Armature
|
$50.00
|
| PS-107MM
|
MegaMaster G20 Armature
|
$55.00
|
|
|
| ARMATURES
|
| CNC Machine Wound Armatures
|
| PS-206
|
P15 International - available in diameters
from .480 to 500, standard length .860
|
$40.00
|
| PS-207
|
C12 - available in diameters from .480 to Scale Racing Armatures, .007 or .014 laminations -
.500, lengths of .750 to .860, standard timing 34
degrees
|
$40.00
|
| PS-700
|
S16D
|
$30.30 |
| PS-700B
|
S16D .560
|
$30.30 |
| PS-700C
|
S16C
|
$30.30 |
| PS-700C-B
|
S16C .560 |
$30.30 |
| PS-700S
|
Outlaw S16D .450 stacks .520
|
$30.30 |
| PS-700S-B
|
Outlaw S16D .450 stacks .540
|
$30.30 |
| PS-701
|
Box Stock X12 .513
|
$33.50 |
| PS-701B
|
Box Stock X12 .540
|
$33.50
|
| PS-701BD
|
Box Stock X12 .540 drill blank
|
$37.50
|
| PS-701BI
|
Box Stock X12 .550, .555 or .560
|
$34.50
|
| PS-701L
|
Box Stock X12 .514 to .518 diameter
|
$33.50
|
| PS-701D
|
Box Stock X12 .513 with drill blank
|
$37.50
|
| PS-702
|
USRA Spec 15 .513, only available with 38
degrees timing
|
$33.50
|
| PS-702D
|
USRA Spec 15 .513, only available with 38
degrees timing, and drill blank
|
$37.50
|
| PS-703
|
G20 .513
|
$39.95
|
| PS-704
|
Super Wasp .513
|
$29.50 |
| PS-704B
|
Super Wasp .540
|
$29.50
|
| PS-704BI
|
Super Wast .550, .555 or .560
|
$29.50
|
| PS-705
|
Contender .513
|
$29.50
|
| PS-705B
|
Contender .540
|
$29.50 |
| PS-705BI
|
Contender .550, .555 or .560
|
$29.50
|
| PS-706
|
16D .518 balanced or unbalanced
|
$30.30 |
| PS-706B
|
16D .560 balanced
|
$30.30 |
| PS-708
|
G20 - available in diameters from .480 to .500,
lengths of .860 to .935
|
$39.95 |
| PS-707
|
Infinity replacement armature for PS-315 RTR
30Turn 26
|
$33.00
|
| Note: Unless otherwise indicated standard timing is 38 degrees. If desired,
order the timing of your choice. All armatures are produced with the M blank
unless you request our Intruder blank.
|
|
|
| Group 27
|
| PS-211
|
Group 27 available in diameters of .480 to .500,
timing of 32, 35 or 40 degrees, standard length is .850
|
$59.00
|
| PS-211F
|
Group 27 wound with flat wire - available
same as above
|
$59.00
|
| PS-800
|
Group 27 .459 diameter, timing of 32, 35 or 40 degrees, standard length is .850
|
$59.00
|
|
|
| Scale Racing Armatures, .007 or .014 laminations - standard with Edm Commutators
|
|
|
| PS-109A
|
X-blank .665 long, .250 stacks,.014
laminations
|
$45.00 Net
|
| PS-109A-007
|
X-blank .665 long, .250 stacks, .007
laminations
|
$45.00 Net
|
| PS-109B
|
X-blank .750 long, .300 stacks,.014
laminations
|
$45.00 Net
|
| PS-109B-007
|
X-blank .750 long, .300 stacks, .007
laminations
|
$45.00 Net
|
| PS-110A
|
Mark 7 blank, .665 long, .250 stacks, .007
laminations
|
$45.00 Net
|
| PS-110B
|
Mark 7 blank, .750 long, .300 stacks, .007
laminations
|
$45.00 Net
|
| PS-111C
|
Capped Scale Armatures X-blank .007 or .014
laminations or Mark 7 .007
|
$45.00 Net
|
| Note: Scale armatures available in diameters of .450 to .500. Standard
winds
31/27, 33/27, 35/28, 38/28, 40/28, 26/26. Custom winds available on
request.
|
| Group 7 armatures - standard with Edm
Commutators
|
| PS-220
|
Group 7 X-blank
|
$45.00 Net
|
| PS-221 |
Group 7 Mark 7 blank
|
$45.00 Net
|
| PS-851
|
Group 7 .459 blank
|
$45.00 Net
|
| Note: Standard length is .850. Standard winds available 15/23, 15/24,
16/24, 17/24, 18/24, 16/24.5, 17/24.5, and 18/24.5. Custom winds
available on request.
|
| Group 7 armatures with HAND SELECTED
failsafe commutators and hard anodized caps
|
| PS-220C |
Group 7 X-blank
|
$45.00
|
| PS-221C |
Group 7 Mark 7 blank
|
$45.00 Net
|
| PS-851C
|
Group 7 .459 Blank
|
$45.00 Net
|
| Note: Standard winds available 14/23.5 15/23, 15/23.5, 15/24, 15/24.5,,
16/24, 16/24.5, 17/24, 17.24.5, 18/24.5, 19/24.5, 17/25, 18/25, 19/25.
Custom winds available on request
|
|
|
| C-CAN MOTORS
|
| PS-723
|
Group 12 Motor
|
$52.75
|
| PS-723D
|
Group 12 Motor with drill blank
|
$56.75
|
| PS-728
|
USRA Spec 15 Motor, 38 degrees
|
$52.75
|
| PS-728A
|
USRA Spec 15 Motor with Drill blank, 38 degrees
|
$56.75
|
| PS-729
|
Contender Motor - unbalanced
|
$52.75
|
| PS-729B
|
Contender Motor - balanced
|
$52.75
|
| PS-730
|
Group 20 Motor
|
$55.75
|
| PS-732
|
Super Wasp Motor
|
$52.75
|
| PS-734
|
Super 16C Motor
|
$49.00
|
| All motors come standard with our VIP can. If you want our SRS can add it to the part number
Note: All motors are standard with 38 degrees timing. If desired order timing of your choice. All motors come standard with Mega III Magnets. All
armatures are produced with our M blank unless you request our Intruder blank.
|
|
|
| BLUEPRINTED C-CAN MOTORS & SETUPS
|
| PS-740PRO |
Group 12 motor with epoxied magnets honed to ~.529 to .530.
|
$80.20
|
| PS-740
|
Group 12 Motor
|
$62.45
|
| PS-741
|
Super Wasp Motor
|
$58.45
|
| PS-742
|
Group 20 Motor
|
$64.98
|
| PS-743
|
Quad 20 Motor
|
$96.45
|
| PS-751
|
Group -12 Pro C-Can Blueprinted Setup
|
$50.00
|
| PS-751B
|
Group -12 Pro C-Can Blueprinted Setup .555
|
$52.00
|
| PS-760PRO
|
Blueprinted motor with epoxied magnets honed to ~.555 with your choice of (A) Contender,
(B) Super Wasp, S16C, (C) X12 - .540 Diameter
|
$86.50
|
| All motors come standard with our VIP can. If you want our SRS can add it to the part number
Note: All motors are standard with 38 degrees timing. If desired order timing of your choice. All motors include straightened can, soldered oilite, matched
magnets, goldust brushes, champion springs, aligned and honed brush hoods and are fully tested. All motors come standard with our Mega III magnets
except PS-743 unless you request our Mega II magnets. All armatures are produced with our M blank unless you request our Intruder blank. Add $14.00
for ball bearing motors.
|
| |
| MOTOR AND ENDBELL PARTS
|
| Setups and Kits
|
| PS-749VIP
|
C-can Setup kit (without magnets)
|
$19.00
|
| PS-749SRS
|
C-can Setup kit (without magnets)
|
$19.00
|
| PS-750VIP
|
C-can setup with our Mega III magnets
|
$30.00
|
| PS-750SRS |
C-can setup with our Mega III magnets
|
$30.00
|
| |
| Motor Cans
|
| PS-714 Pro-VIP
|
Blueprined C-can - straightened perfectly
|
$11.95
|
| PS-714 Pro-SRS
|
Blueprinted C-can - straightened perfectly
|
$11.95
|
| |
| Endbells and Parts
|
| PS-618
|
Assembled Endbell - undrilled
|
$10.50
|
| PS-640
|
Magnet Clips for C-can 12 (.22 ea.)
|
$2.64
|
| PS-641
|
Brush Hood & Heat Sink set
|
$3.98
|
| PS-642
|
Hardware set complete -includes hardware, oilite, spring cups and screws
|
$6.50
|
| PS-643
|
Complete Endbell Kit - includes endbell, hardware, spring cups, oilite and screws
|
$9.00
|
| PS-711
|
Endbell with oilite bushing
|
$4.35
|
| PS-716
|
2 x 5 oilites 12 (.60 ea.)
|
$7.80
|
| PS-717
|
Set of 8 (.30 ea.) self starting T5 Torx can and endbell screws
|
2.40
|
| PS-717B
|
Bulk pack of 50 (.25 ea.) self starting T5 Torx can and endbell screws
|
$12.50
|
| PS-722
|
Alloy Spring Cups 24 (1.50 pr.)
|
$18.00 |
| |
| C-Can MAGNETS
|
| PS-905
|
SMQ Single Magnet Quads - perform similar to a quad magnet
|
$9.50
|
| PS-906
|
SMQ Matched Magnets
|
$13.50
|
| PS-907
|
HEQ High Energy Quad Magnets - used in our PS-743 Quad 20 motor.
|
$22.00
|
| PS-910 |
15A Monster Magnets
|
$35.00
|
| PS-911
|
Int 15A Tall, 6-Segment Magnets
|
$35.00
|
| PS-912 |
MEGA III Matched Blue Dot Magnets - same as our PS-908 only .450 long
|
$13.00
|
| PS-913
|
Cobalt Magnets for C-12 racing. .450 tall x .360 long x .065 thick
|
$53.95
|
| |
| BALL BEARINGS
|
| PS-400 |
2 x 5 can/endbell ball bearing, unflanged & unshielded - for Cobalt racing (7 Balls)
|
$7.00 ea
|
| PS-401 |
2 x 5 endbell ball bearing, flanged and double shields -perfect for c-can endbells (7 Balls)
|
$7.00 ea
|
| PS-402 |
x 5 can ball bearing, flanged & double shields. Perfect for c-cans or Grp 7 cans (7 Balls)
|
$7.00 ea
|
| PS-410 |
3/32 x 3/16 axle ball bearings, flanged and double shields (10 Balls)
|
$11.00 pr
|
| PS-420
|
1/8 x 1/4 axle ball bearings, flanged & double shields (7 Balls)
|
$11.00 pr
|
| PS-430
|
2 x 6 can/endbell ball bearing, flanged & double shields - for Mura or Parma motors (6 Balls)
|
$7.00 ea
|
| |
| GEARS
|
| PS-670 |
Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the
hub. 35- red, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
|
$3.25
|
| PS-671
|
Polymer Gears 64 Pitch (Bulk Pack) Same as above but bulk pack of 25 (3.00 ea.)
|
$75.00
|
| PS-672 |
Polymer Gears 48 Pitch - Same as PS-670 except 48 pitch. 26T-pink 27T-white, 28T-yellow, 29T-violet,
30T-green, 31T-blue, 32T-brown
|
$3.25
|
| PS-673
|
Polymer Gears 48 Pitch (Bulk Pack) Same as above but bulk pack of 25 (3.00 ea.)
|
$75.00
|
| PS-674
|
Polymer Gears 72 Pitch 40-green, 41-yellow, 42-pink, 43-black, 44-
|
$4.50
|
| PS-675
|
Polymer Gears 72 Pitch (Bulk Pack) Same as above but bulk pack of 25 (4.25 ea)
|
$106.25
|
| |
| TOOLS
|
| PS-608
|
Pro Turn .050 Precision Torx Driver - Fits our new T5 endbell and can screws
|
$9.00
|
| PS-609 |
Pro Turn .050 Precision Allen Driver
|
$8.50
|
| |
| GOLDUST PRO BRUSHES
|
| PS-623
|
Production Motor Brushes 6 pair (1.60 pr)
|
$9.60
|
| PS-900
|
Goldust Pro Motor Brushes 6 pair (3.50 pr.)
|
$21.00
|
| PS-901
|
Goldust Pro Motor Brushes Bulk Pack 50 pair (3.15 pr.)
|
$162.50
|
| PS-903
|
Goldust Pro Vertical Motor Brushes 6 pair (4.00 pr.)
|
$24.00
|
| PS-904
|
Goldust Pro Motor Brushes -shortened to fit Euro MK1 Motors 6 pair (4.50 pr.)
|
$27.00
|
| |
| PARTS AND ACCESSORIES
|
| PS-607
|
3/32 Drill Blank Axle - 6 (1.99 ea.)
|
$11.94
|
| PS-610
|
Super Light Front Wheels
|
$1.85 |
| PS-613
|
Silver Shunt Wire - 6 (1.25 ea.)
|
$7.50 |
| PS-614
|
Silver Shunt Wire - Bulk Pack of 10 feet
|
$10.00
|
| PS-619
|
Lead Wire with Clips - 6 (2.00ea.)
|
$12.00
|
| PS-621
|
Lead Wire - Bulk Pack of 3 feet
|
$3.00
|
| PS-622
|
Lead Wire - Bulk Pack of 10 feet
|
$6.00
|
| PS-624 |
Standard Lead Wire Clips .012 thick hard brass 6 pr. (1.25 pr)
|
$7.50 |
| PS-625 |
Internal Lead Wire Clips .012 thick hard brass 6 pr. (1.25 pr.)
|
$7.50 |
| PS-724
|
Armature Spacer Kit - Includes 2 phenolic and 8 brass motor spacers (.12 ea.)
|
$1.20
|
| |
| CHASSIS
|
| PS-317-08
|
Perimeter Box Stock Chassis (4.430 long) - 2008/2009 version
|
$48.50
|
| PS-318-08
|
Tripod Box Stock Chassis (4.370 long) - 2008/2009 version
|
$48.50
|
| PS-319 |
USRA Spec 15 Chassis - each chassis has a serial number and should be registered with the USRA. A
registration sheet is included with each chassis.
|
$48.50
|
| Note: All five chassis are laser cut from spring steel and feature an integral guide tongue, laser cut leadwire guides and front wheel mounts and additional
bracing behind the front pin tubes. Front underside of chassis are chamfered.
|
| |
|
|
| PS-314 |
RTR - features your choice of PS-318-04, PS-317-08, PS-318-08 or PS-319 chassis - available with the
one of the below motors:
|
|
|
PS-723 Group 12
|
$135.00
|
|
|
PS-729 Contender
|
$135.00
|
|
|
PS-730 Group 20
|
$135.00
|
|
|
PS-732 Super Wasp
|
$135.00
|
| PS-314R |
Rolling car ready for your favorite motor, features your choice of PS-317-06, PS-318-04, PS-317-08, PS-
318-08 or PS-319 chassis
|
$98.00
|
| PS-315
|
RTR with your choice of our chassis - Comes with a 30T/26 armature in a C-can with Mega II magnets,
ball bearings and shunted Goldust Brushes
|
$164.50
|
