687 Lincoln Lake Ave. S.  - Lowell, Mi. 49331  - PH: (616) 897-6000  - FAX : (616) 897-6052 - Email: dan@proslot.com
Setting the Pace & Winning the Race
World Wide
Products for the new millennium and beyond
 Catalog PDF
The appropriate software is free at www.adobe.com/products/acrobat/readstep.html

[CATALOGUE]  [RECONDITIONING]  [INFO]  [RACING NEWS] 
New Product Release

New Products Release
07/09/2010
Pro Slot Ltd.
 
ps



Attention:
Bracket Racers, Class Racers & Track Owners

The PS-2108A Econo Pro Stock Motor.

For the Econo MMPS class requiring a tagged American made armature. This motor features a .565 Airgap and our Race Proven PS-105 Drag S16D armature. It comes fully blueprinted and with Goldust brushes. Standard timing is
45 degrees. (Custom timing upon request.)
 
Track Owners now you can provide your racers with a competitive ‘off the shelf’ EMMPS motor. No need to send your racers to aftermarket motor builders.
psnew
 
PS-2108A Econo Pro Stock Motor
It’s finally here!

The PS-725 DragMaster “SPEC” Motor.

This motor was Dyno designed to fall between the PS-101 and the PS-748-20 in performance but on a budget. This motor is based on our race proven ‘SRS’ set-up and has an all new SPEC armature. Featuring a softer launch than the Quad 20 but will still pull 110,000+ rpm at the topend! This motor comes with Goldust brushes and is double security sealed to prevent tampering. Track Owners wishing to hold class races, this is the perfect motor for you. It will provide your racers with a level playing field and put the fun back in racing.
 
Dyno Proven* – Racer Tested!

d1 



New Lower resistance DragMaster
X-12’s & G-20’s

With all of the problems going on in the “Class Racing” world right now, Pro Slot has redesigned our PS-106 X-12 & PS-107 G20 armatures. They now feature lower resistance and an 8% power increase over the competition. The new armatures will supercede the old armatures in current production.

___________________________________________
New Product Release 07/12/2010 Part numbers & Prices:


PS-674 Polymer Gears 72 Pitch 40-green, 41-yellow, 42-pink, 43-black $4.50

PS-675 Polymer Gears 72 Pitch (Bulk Pack) Same as above but bulk pack of 25 (4.25 ea) $106.25



Pro Slot is expanding our motor rebuilding program to include these DragMaster Motors.

PS-725 Dragmaster SPEC motor………………………$18.00
    Includes: Ultra sonic cleaning, re-zapping magnets, recondition armature,
New Goldust brushes & springs, new can bushing if needed and
reseal the motor.
Additional parts extra:
    New armature……………$18.00
    New Endbell……………....$5.50

PS-748-12, PS-748-20 & PS-733 DragMaster Motors…$18.00
    Includes: Ultra sonic cleaning, re-zapping magnets, recondition armature,
New Goldust brushes, springs, shunt wire & new bushings if needed.
Additional parts extra:
    New X-12 or G20 armature……………$24.00
    New Topgun armature…………………$35.00
    New MegaMaster armature……………$33.00
    New Endbell……………….…………....$6.50
    New Ball Bearings………………………$7.00 each

(Track Owners please contact us about Raceway discounts)
The All New Pro Slot
PS 712 Pro Outlaw Armature - $39.95


Designed from the ground up for the new Pro Outlaw Class.
Featuring the same advanced wire technology
as our competition and wound on the
race proven Intruder Blank for optimum
performance.
Our Dyno tests have shown an 8% power increase over the competition!
These armatures are straight wound for compatibility, tagged, precision ground & balanced and require no further machine work to be competitive.

 d2


New Product Release 07/09/2010 Part numbers & Prices:


PS-712        Pro Outlaw Armature                        $39.95
PS-725        DragMaster “SPEC” Motor                    $55.00
PS-2108A        Econo Pro Stock Motor                           $55.00
PS-106       DragMaster X-12 Hemi Armature (New)           $37.95
PS-107       DragMaster G-20 Hemi Armature (New)            $39.95
            
sp

 
PS-725 DragMaster SPEC Motor

Pro Slot Ltd.
687 Lincoln Lake Ave S.E.
Lowell, MI. 49331-9416
616-897-6000
dan@proslot.com
www.proslot.com


news
logo
Pro Slot Ltd.
Bracket Racers, Pro Slot has heard you!
You have asked for performance without the loss of consistency so important to a winning bracket racing program.
You have asked for new technology without breaking the bank.
It’s finally here!
The PS-101 Sportsman “550” Big Block GP20 Motor.
Bolt in performance increase over your S16D motors without the loss of consistency.
Based on our proven SpeedFX D-can setup, this motor features the next generation .550 diameter GP20 armature. Designed for a “soft” launch in near ‘no glue’ bracket racing track conditions and still pull over 90,000+ rpm for outstanding topend performance. This motor comes fully blueprinted with Goldust brushes.

grph

Dyno Proven* – Racer Tested!
For the racer who has a good S16D motor already but wants to step-up the performance without replacing the entire motor. We offer the PS-102 “550” Big Block GP20 replacement armature. This is the same armature used in the PS-101 Sportsman “550” Big Block GP20 Motor and is a drop in fit for all OEM D-can setups.
New Product Release 05/28/2009 Part numbers & Prices:
PS-101 Sportsman “550” Big Block GP20 Drag Motor $42.85
PS-102 Sportsman “550” Big Block GP20 Armature $28.30
PS-103 .450 “Magnum” Topgun Motor $139.45
Your Choice: Quad/6-Mag - 44/54/43 Wind
PS-104 .450 “Magnum” Topgun Armature $58.50
Your Choice: 44/54/43 Wind
PS-738D-12 Sportsman X-12 Drag Motor $55.70
logo

ProSlot New Products Release

May 2009

Euro MK1 Motors & Parts

PS-4002B-CCW Euro MK1 Motor with American made PD (Puppy Dog) armature as used in retro can am racing- This motor runs correctly CCW Rotation. $41.00

PS-4002C-CCW Euro MK1 Motor with American made BD (Big Dog) armature CCW Rotation . $41.00

PS-4002-12-CCW Euro MK 1 Motor with American made X12 armature 38* CCW Rotation $41.00

PS-4009-CCW PD (Puppy Dog) American made replacement armature (requires modified endbell PS-4011 for comm clearance). CCW Rotation $24.50

PS-4010-CCW  BD (Big Dog) 55 turns of 30 gauge with 25 degrees timing American made replacement armature (requires modified endbell PS-4011 for comm clearance). CCW Rotation $24.50

PS-4012-CCW  X12 with 38 degrees timing American made replacment armature (requires modifed endbell PS-4011 for comm clearance). CCW Rotation $24.50

Note: Clockwise or counter clockwise Rotation when armature is viewed from the can end.  Motors and armatures with CCW rotation are best suited for 1/32 cars of Slot-it, Mosler and Scalecxtric and any other that requires armatures and motors with CCW Rotation.

Ready to Run Cars

PS-314R Rolling car ready for your favorite motor, features your choice of   PS-318-04, PS-317-08, PS-318-08 or  PS-319  chassis $94.00

November 6, 2008
New Product Release
With the popularity of the EMMPS type classes track owners can now keep the parts & motor sales "In House". No more having to deal with specialty blueprinters or motor builders and dealing with short discounts just to provide a few high cost parts to racers. Now track owners can offer their racers an over the counter, competitive, legal EMMPS motor without draining their racers pockets.

PS-2108 Blueprinted S16D Econo ProStock (EPS) Motor..$49.95
This motor features a blueprinted set-up, matched magnets, tightened airgap and a legal Chinese S16D armature with cut comm., balanced & tweaked to 40 degrees timing. All EPS armatures are Pre-tested to meet EMMPS specs.

PS-2109 EPS Replacement Armature...$22.95
This is the same armature used in our PS-2108 EPS Motor. A legal Chinese S16D armature with cut comm., balanced & tweaked to 40 degrees timing. All EPS armatures are Pre-tested to meet EMMPS specs.

ProSlot New Products Release 9/1/07
Available now!

SpeedFX C-Can and D-Can Stamped Steel Chassis
PS-5000 SpeedFX C-Can Chassis $21.95
PS-5000C C-Can Center Section $11.95
PS-5001 SpeedFX D-Can Chassis $21.95
PS-5001C D-Can Center Section $11.95
PS-5002 Standard pans $10.95
PS-5003 Medium pans $10.95
PS-5004 Light Pans $10.95
Big Diameter Armatures
PS-700B S16D Armature .560 $26.95
PS-700C-B S16C Armature .560 $26.95
PS-704B Super Wasp Armature .540 $26.38
PS-705B Contender Armature .540 $26.38
PS-706B 16D Armature .560 $26.95
Standard timing is 38 degrees. You may request special timing
SpeedFX 16D/S16D Blueprinted Motors & Setups

PS-2110 Motor with .560 Balanced Armature. $45.45

(A) S16D, (B) Outlaw S16D, (C) 16D
BluePrinted C-Can Motors & Setups

PS-760PRO Blueprinted motor with epoxied magnets $81.20

Honed to ~.555 with your choice of
(A) Contender .540
(B) Super Wasp .540
(C) S16C
NEW PRODUCT RELEASE
EURO MK1 MOTOR
SPARE PARTS
PS-4002B Euro MK1 Motor with American made PD (Puppy Dog) armature and 25*
timing as used in the retro can am racing $41.00
PS-4008 Replacement balanced armature for the PS-4002 (commutator trued and
rebalanced) $9.29
PS-4009 PD (Puppy Dog) 25 degrees timing American made replacement armature
(requires modified endbell PS-4011 for comm Clearance). $24.50
PS-4010 BD (Big Dog) 25 degrees timing American made replacement armature
(requires modified endbell PS-4011 for comm clearance). $24.50
PS-4011 Replacement endbell modified for commutator clearance with American made
armatures $5.99


EURO MK1 MOTOR

 

PS-4000 Euro MK1 Motor Designed for 1/32 and 1/24 Scale - Home, Club and Commercial Racing (Perfect for Rental Cars). Features epoxied armature, dynamic balance, phenolic molded commutator, replaceable motor brushes and springs, high gauss magnets, double-ended shaft for mounting in any standard "Mabuchi" application. Standard with the 45 degree springs. Features endbell mounting holes in the can to allow for rebuild and scratch builders. Also Available Double Security Sealed $19.15

PS-4013-45 Replacement Springs 45 degrees $1.00

PS-4013-60 Replacement Springs 60 degrees $1.00

PS-4013-90 Replacement Springs 90 degrees $1.00

PS-4014 Replacement Motor Brushes $1.60
Specifications: 26,100 rpm, 155/gm-cm, 280ma
 
Available at Better Raceways Worldwide!
The Dragmaster Sportsman Series
PS-737-D The Dragmaster Sportsman Setup

This setup includes our race proven Dragmaster can and endbell w/copper hardware, Mega III FX magnets installed with spring clips. This setup is built to UDA Sportsman specs and is approved by The UDA for competition. $29.00
PS-738-D The Dragmaster Sportsman G20 Motor

This motor includes our race proven Dragmaster can and endbell w/copper hardware, Mega III FX magnets installed with spring clips and a PS-703 .513 G20 armature*. This motor is built to UDA Sportsman specs and is approved by The UDA for competition $47.45
Attention Track owners;
Are your drag racers looking for a *tamper resistant spec type motor with more power than the sealed S16D's currently available? If so, then the New Dragmaster Sportsman SSA Spec Motor may be just what you need. Contact Mark Willson at Eagle Distributing for more information.
PS-739-D Dragmaster Sportsman SSA Spec Motor



This motor includes our race proven Dragmaster can and endbell, Mega III FX magnets installed with spring clips and a Specially tagged .513 G20 armature with 40 degrees timing*. This armature is tagged "SSA20", dyed a special color and is only available in this motor, not as a separate item. The motor screws are ground and the can is sealed to prevent tampering. This motor is built to UDA Sportsman specs and is approved by The UDA for competition.. $48.45
*Custom timing is not available on this motor.
 

Sign up for the Pro Slot Mailing List and receive special announcements by automatic email notification whenever changes are made to the Pro Slot Ltd. website.

 

 

Pro Slot Limited, 687 Lincoln Lake Ave. S. ,Lowell, Mi. 49331
PH: (616) 897-6000 FAX : (616) 897-6052

 
Email Pro Slot Ltd. at dan@proslot.com

Copyright 1998-2010 by Pro Slot Ltd.
Web Page Design by Ford Publishing